Occasionally, during your CCNA and CCNP studies, you’ll run into a term that just doesn’t quite make sense to you. (Okay, more than occasionally!) One such term is “reverse telnet”. As a Cisco certification candidate, you know that telnet is simply a protocol that allows you to remotely connect to a networking [...]
CCNP exam success, particularly on the BSCI exam, demands you understand the details of route summarization. This skill not only requires that you have a comfort level with binary conversions, but you have to know how and where to apply route summarization with each individual protocol.
You also have to know the “side effects” of [...]
To pass the BSCI exam and move one step closer to CCNP certification success, you’ve got to know how and when to use debug commands to troubleshoot and verify network operations. While you should never practice debug commands on a production network, it’s important to get some hands-on experience with them and not rely on [...]
To pass the CCNA exam, you’ve got to create a study plan. Part of that plan is scheduling your study time, and making that study time count.
You’ve scheduled your exam you’ve created a document to track your study time you’ve planned exactly when you’re going to study. Now the plan must be carried out, without [...]
To pass the CCNA exam, you’ve got to know how to work with IGRP and EIGRP unequal-cost load balancing. You may not see much IGRP in production networks anymore, but you’ll see a lot of EIGRP, and part of fine-tuning your EIGRP network is making sure that all paths are in use while allowing for [...]
When you begin your CCNA studies, you get hit with a lot of different networking terms right away that you might not be familiar with. What makes it a little more confusing is that a lot of these terms sound a lot alike. Here, we’re going to discuss the differences between broadcasts, multicasts, and unicasts [...]
DNS behaviors of a Cisco router are important topics for both the CCNA exam and real-world production networks, and you probably didn’t know there were so many DNS details before you began studying for the exam! In this tutorial, we’ll look at the ip name-server command and its proper usage.
When a command is mistyped on [...]
When you’re studying for the BSCI exam on the way to earning your CCNP certification, it’s safe to say that BGP is like nothing you’ve studied to this point. BGP is an external routing protocol used primarily by Internet Service Providers (ISPs). Unless you work for an ISP today or in the future, you [...]
To pass the BSCI exam and earn your CCNP, you’ve got to know ISIS inside and out. There are many similarities between ISIS and OSPF, but one major difference is that ISIS has three different types of routers - Level 1 (L1), Level 2 (L2), and L1/L2.
L1 routers are contained in a single area, [...]
When you’re studying for the CCNP certification, especially the BSCI exam, you must gain a solid understanding of BGP. BGP isn’t just one of the biggest topics on the BSCI exam, it’s one of the largest. BGP has a great many details that must be mastered for BSCI success, and those of you [...]
