In the first part of this free CCNP / BSCI tutorial, we looked at how leaving one simple word out of our route redistribution configuration - “subnets” - resulted in an incomplete routing table when redistributing routes from RIP to OSPF. (If you missed that part of the tutorial, visit my website’s “Free Tutorials” [...]
Learning IPv6 is paramount in your efforts to pass the BSCI exam and go on to earn your CCNP, and it’s going to help in your real-world networking career as well. IPv6 can be confusing at first, but it’s like anything else in Cisco or networking as a whole - learn one part at [...]
To pass the BSCI exam and become a CCNP, you have to be aware of the proper use of passive interfaces. You learned about passive interfaces in your CCNA studies, but here we’ll review the basic concept and clear up one misconception regarding passive interfaces and OSPF.
Configuring an interface as passive will still allow [...]
Your CCNA studies are going to include quite a bit of information about switches, and for good reason. if you don’t understand basic switching theory, you can’t configure and troubleshoot Cisco switches, either on the CCNA exam or in the real world. That goes double for trunking!
Trunking is simply enabling two or more switches to [...]
Configuring RIPv2 and EIGRP authentication with key chains can be tricky at first, and the syntax isn’t exactly easy to remember. But for BSCI and CCNP exam success, we’ve got to be able to perform this task.
In a previous tutorial, we saw how to configure RIPv2 packet authentication, with both clear-text and MD5 authentication schemes. [...]
When you’re studying for your BSCI exam and CCNP certification, you quickly realize that BGP is a whole new world from anything you’ve previously studies. One topic that sometimes confuses CCNP candidates is when a BGP route reflector needs to be configured.
In the following example, the routers R1, R2, and R3 are all in [...]
CCNA / CCNP candidates are going to be drilled by Cisco when it comes to troubleshooting questions. You’re going to have to be able to analyze configurations to see what the problem is (and if there is a problem in the first place), determine the meaning of different debug outputs, and show the ability [...]
Once you get your CCNA and CCNP, you can’t just rest on your accomplishment. You’ve got to continue to study and add to your skill set - and then prove to Cisco you’ve been doing just that by recertifying.
Recertification sounds like a pain, but it’s actually one of the best things to ever happen to [...]
When you start preparing for your CCNP exam, particularly the BSCI exam, you’re introduced to Border Gateway Protocol (BGP) configurations. BGP is unlike any protocol you learned during your CCNA studies, and even the similarities are a little bit different!
BGP forms neighbor relationships, much like EIGRP and OSPF do. The interesting thing with BGP is [...]
To earn your CCNP, you’ve got to pass some very rigorous Cisco exams, and you also need to know the rules regarding this important certification. In this article, I’ll answer some of the most commonly asked questions regarding the CCNP.
Q: What exams do I need to pass to get my CCNP?
A: You [...]
