Passing Cisco CCNA And CCNP Exams: Ping And Extended Ping

Thursday, January 1st, 2009

I often tell CCNA and CCNP candidates that you do your best learning when you screw something up. I often get a funny look right after I say that, but the only way to develop your Cisco troubleshooting skills - the skills you’ll need to pass your Intro, ICND, and CCNP exams - is [...]

Passing Cisco

Wednesday, June 4th, 2008

In preparation for your CCNA and CCNP exam success, you’ve got to learn to troubleshoot Cisco routers. And while ping is a great basic IP connectivity tool, it doesn’t give you all the information you need to diagnose network connectivity issues.
Let’s say you have six routers between CityA and CityB. You send a ping from [...]

Cisco CCNA Certification: Five Key Combinations You Should Know

Sunday, May 4th, 2008

When you start studying for your CCNA and CCNP exams, many books will present you with a huge list of keystroke shortcuts for use on Cisco routers. While the 640-801, 811, and 821 exams may ask you about one or two of these, you really have to get hands-on experience with these commands to [...]

Cisco Routing: “ip default-network” vs. Default Static Routes

Thursday, May 1st, 2008

One point of confusion for some CCNA and CCNP candidates is the difference between configuring a static default route and using the Cisco routing command ip default-network.
At first glance, they appear to do the same thing. Both configure a destination to which packets should be routed if there is no more specific route in the [...]

Cisco CCNA Exam Tutorial And Case Study: VLANs and IP Connectivity

Monday, April 7th, 2008

In this CCNA case study, we’ll take some basic switching and trunking theory and put it into action. We have two routers (R2 and R3) along with two switches (SW1 and SW2). R2 is connected to SW1 at fast 0/2, and R3 is connected to SW2 at fast 0/3. Both routers have [...]

Cisco CCNA Exam Tutorial: Loopback Interfaces

Tuesday, January 1st, 2008

As a CCNA candidate, you most likely have some background in PC hardware and workstation support. If so, you’re already familiar with loopback interfaces, particularly 127.0.0.1, the loopback address assigned to a PC.
When you’re learning all about the different physical interfaces for your CCNA exam - serial, ethernet, and BRI, among others - there’s [...]

Cisco CCNA / CCNP Exam Tutorial: Testing ISDN Links Without Pings

Tuesday, January 1st, 2008

To earn your Cisco CCNA and CCNP certifications, you’ve got to master ISDN - and despite what some people say, there’s still a lot of ISDN out there that needs to be supported. And when it comes to troubleshooting ISDN, there’s a lot to look at. Is the correct ISDN switchtype configured? Are [...]